アートワークを確認するには画像をクリックしてください
認証取得 
Features
● Combination of highly adsorptive and mechanical retention for effective clarification
● High dirt holding capacity and excellent flow performance
● Suitable for the removal of colloids, lipids, protein aggregates and particles
● Glass fiber prefilter layer is available for higher dirt holding capacity and longer service life
● Good oil resistance, wide chemical compatibility
● Economical and ideal choice for protection of final membrane filters
Application
Clarification of wine, spirits, fruit juices, soft drinks or other beverages
● Removal of colloids, lipids and protein aggregates in cell cultures,
● Ophthalmic, LVPs, serum and other media in bio-pharmaceutical industry
● Pre-filtration of fine chemicals, as reagents, inks and paints
● Kinds of lubricating oil and hydraulic oil clarification
● Oil and other contaminants removal in air/gas filtration
Specification
Construction Materials |
Filter Media |
GF |
Support Layers |
Polypropylene |
|
Inner core |
Polypropylene |
|
Outer cage, End Cap |
Polypropylene |
|
Seal Method |
Thermal Bonding, No Adhesives |
|
O-rings/ Gaskets |
Silicone/EPDM/Viton/PTFE/Nitrile |
|
Technical Data |
Micron Rating |
0.45, 1.0, 3.0,5.0, 10 um |
Operating Temperature |
Normal 60℃> |
|
Normal Flow Direction pressure |
4.2 bar (60.9 psi) at 25℃ (77℉ ) |
|
Reverse Flow Direction pressure |
2.1 bar (30.5 psi) at 25℃ (77℉ ) |
|
pH Value Compatibility |
1-13 |
|
Sterilization |
In-line steam sterilization is Not recommended, Flush with hot water at 82℃ (180 ℉ ) for 30 minutes |
|
Cartridge Size |
Outer Diameter |
69 mm(2.75’’) |
Inner diameter |
33 mm(1.30’’) |
|
Length(based on DOE end cap) |
10’’, 20’’, 30’’, 40’’ |
|
Filtration Area(m2) |
0.65 m2/10’’ |
|
Biosecurity |
Endotoxin |
0.25> |
Extractable |
≤30 mg/10’’ |
|
Filtration efficiency |
≥90% |
|
http://ja.longhaimachinery.net/
